How do QCANT inspectors perform Product Inspections?

QCANT performs product inspections services according to:

• Recognized international quality standard: ANSI/ASQ Z1.4-2003 (Equivalent to ISO 2859-1), also known as the AQL Tables

• Client's requirements, specifications, criteria and instructions.

• Our team expertise and experience in quality control.

• Our Western common sense.                  

What do we inspect during an inspection?

• The quantity produced (semi-finished, finished and packed)

• The visual appearance (cosmetic check of the mass production)

• The product specifications (size, dimensions, colours)

• The labelling and marking

• The packing and packaging

• All possible functions and possible tests (safety, abuse, printing etc)

What quality standards do we use?

How to decide if the number of defects found is acceptable?

QCANT uses the recognized international Quality Control standard ANSI/ASQ Z1.4-2003 (Equivalent to ISO 2859-1), also known as the AQL Tables to conduct product inspections services.

Acceptance Quality Limit.

The AQL is the quality level that is the worst tolerable process average when a continuing series of lots is submitted for acceptance sampling.

Basically, we randomly select a sampling size quantity (based on the AQL tables) to be inspected. We inspect the sampling size and classify the defects into Critical, Major and Minor defects.
According to the number of defects found for each type and according to the number of defects allowed (figures given by the AQL tables), we will advise you to accept or to reject your shipment.
Then it is up to you to make your own decision based on the information and recommendations we have provided to you.

Usually, there are 3 types of situations:

• Bargain.

• Accept

• Reject

In fact, there should be more or less only 1 situation: you discuss actual findings with your vendor and the manufacturer and you ask him to pay attention/rework/re-produce/sort out the products...
Of course, in some rare cases, situations can be trickier but we are HERE to help you.

How to use the AQL Tables?

The AQL tables will help to determine the sampling size we will need to inspect according to your ordered quantity and your level of severity (I, II or III). The general inspection levels, the one used by default and by 98% of the people is level II for a standard inspection.            

If your order has multiple references, ideally we should at least inspect a level II on each reference.

Indeed, for a standard order, the standard level II from the AQL gives the minimum sampling size we should check per reference if we do not want to take additional risks. If we inspect a general level II sampling size on multiple references orders, then the sampling size is diluted and divided by the number of references, increasing the risks as the sampling size must be representative enough.

QCANT uses the Acceptance Quality Limit standard (ANSI/ASQ Z1.4-2003) during product inspections unless another standard is requested by the client.

In order to find the necessary sampling size to be inspected, we look at the first chart and find on the left side the range of items being produced in total. You have the choice of levels I, II and III, with Level III being the most stringent testing and level I being the least. Level II is the standard and is most often used. For example, if you are producing 8000 items, at level II you have the letter L, which in the second table says to inspect 200 items.